R80 BMW VM34 Replacement Carburetor Kit | VM34 Mikuni Kit | 1980 to 1987

  The Dual Mikuni VM34 carburetor kit is easily fitted to your BMW R80 and the improvement is instant. This kit includes aluminum sleeves fitted to both ends of the Mikuni VM34 to match the original Bing carburetor dimensions. 

  *We supply Motion Pro throttle cables that require assembly.

 When 40mm Bing Carbs which have a 52mm outlet spigot diameter at the motor end, we fit a larger 52mm sleeve so as to properly match your OEM rubber boot some very early models do differ.
Please verify before youe OEM intake boot side when ordering.

The Mikuni vm34 carb dimensions are 50mm inlet x 113mm front to back length x 44mm outlet.
Removal of a mm or two in length from the air filter plastic pipe may be required but usually not necessary (stock carb 110mm long).

Once tuned a VM Mikuni will not go out of tune for many years.

You will instantly experience better throttle response, improved acceleration, increased horsepower and torque.

 The BMW R 80 G/S is a motorcycle that was manufactured in Berlin, Germany, by BMW Motorrad from 1980 to 1987. Production totalled 21,864 bikes. It was the first in the BMW GS family of specialised dual-sport bikes, of which over 500,000 have been produced,[1] and is often considered the world's first "Adventure Bike" able to be equally capable on and off road. The designation G/S stands for the German words Gelände/Straße, which mean offroad/road – highlighting the bike's dual sport design

This carb kit is a perfect upgrade for the BMW. Reliable carbs and upgraded performance. What more could you ask for?

Fits 1980 to 1987  BMW r80 Motorcycles