Motorcycle Bar Mount Black Handlebar Mount GPS Digital Speedometer MPH / KPH - Fits 1" (25.4mm) Bars

     GPS DIGITAL HANDLEBAR MOUNT SPEEDOMETER

 Easy to rotate gauge for multiple location mounting!

This custom speedometer uses the latest GPS technology and is a great simple solution for custom bike builders - there are no modifications required to install on your bike.

The digital speedo uses a GPS signal to monitor your speed accurately without the need for a mechanical or electronic sensor.

This speedometer is extremely easy to install and simply mounts onto your bike's handlebars. For the wiring, it is simply 3 wires to connect - power, earth & backlight wire. After installation, mount the GPS antenna somewhere flat using the magnetic backing with an uninterrupted view of the sky and it’s all good to go!

The stylish speedometer housing is made from high grade CNC machined 6061 Billet Aluminum with black anodizing.

Perfect for Harleys, Cruisers, Custom Bikes, Project Bikes, Scramblers, Cafe Racers, Rat Bikes, Quad Bikes, etc

PLEASE NOTE: DUE TO THE POSSIBILTY OF SMALL VARIANCES IN THE THICKNESS OF DIFFERENT HANDLEBARS (THINNER PAINT, ETC) THERE MAY BE SOME MINOR SPACING MATERIAL (EG. THIN RUBBER STRIP ETC) REQUIRED ON YOUR HANDLEBAR BEFORE YOU MOUNT THIS SPEEDO TO ENSURE THE MOUNTING BRACKET CAN BE TIGHTENED SOLIDLY TO YOUR BAR.

SPECIFICATIONS 

• 12V / 24V
• TURN SIGNAL FUNCTION
• LCD DIGITAL DISPLAY
• MPH / KPH (Small button at the rear of the speedo to change between imperial & metric measurement)
  
• ODOMETER
• BACKGROUND LIGHT
• 100% WATERPROOF - IP67
• FITS 1"(25.4MM) HANDLEBARS
  
• CNC MACHINED BILLET ALUMINIUM HOUSING + MOUNT
  
• WIRING INSTRUCTIONS INCLUDED
• DIMENSIONS - PLEASE SEE PHOTOS
  
  

 This high quality speedometer uses GPS signal to accurately monitor your speed without the need for a mechanical or electronic sensor.

 It has an inbuilt antenna and various display modes - High Beam Indicator, Left & Right Turn Signal Indicator, Oil Pressure Indicator, Low Fuel Indicator, Neutral Indicator and Speed Alert Alarm. Extremely easy to install and totally universal.

 The speedo itself mounts into the dash / panel of your vehicle by cutting a 52mm hole, inserting the speedo and screwing the retaining ring onto the back. The wiring is basically power (+) and ground(+) to make it function and the other wires are for the various indicators as listed above - they can be used if they are needed for your vehicle. If these functions are not required for your purpose you can leave the wires disconnected and only use the functions required.

Perfect for Motorcycles, ATVs, Quad Bikes, Machinery, Boats, Classic Cars, Kit Cars, Buggies, Small Aircraft, etc.