KZ440 motorcycle electronic ignition | replacement ignition kit | Kawasaki twin

Simple and reliable kit for your KZ440 Kawasaki Twin plus some extra bits

• Easy to install electronic ignition.
• Uses stock coils
• Points are fine but this is a upgrade!
• Fits the KZ440 Kawasaki Twin. All years.
• Easy to install 
• High output spark
• Built-in current protection circuit.
• Only 3 wires, built-in Led Timing light
• Computer program controls advance angle and timing.

Specifications

1. Start of Spark Advance: 1400 rpm
2. Full Advance: 3950 rpm
3. Advance Range: 5-37 angle
4. Duty cycle is 33%

KZ400 KZ440 Ignition Instructions '

     Remove stator and cover
      Move stator mark to F
      Remove OEM ignition and remove rotor
     Install new rotor - black point facing left
   Install new ignition making sure black point does not move and is point at gold point
    Use test lamp to adjust timing '  
        Blue wiring from E ignition to blue wire from coils
        Red Wire from coil ignition connects to black wire / white wire from coil
        Plate must be tightened
        Make sure all wiring is correct or you will damage the unit.
        Ignition coil must be over 3 ohms (Stock works fine )    If the ignition does not light up it is your coils.
   
    All units are tested before shipment and work.
     

   Double check all wiring
   Make sure unit  is grounded
   Tighten all screws
    Make sure your ignition switch is not bad.