Description
Say goodbye to hard starting, hesitations and flatspots. This Mikuni TM40 pumper type carburetor, like the VM roundslide non-pump options, will fix all your old stock carb issues and look great whilst also giving you a much bigger performance improvement over the others.
This kit has been specially set up for Virago’s with gravity fuel supply to the carb. If your motorcycle still has the OEM fuel pump, please look up and purchase our alternate kit to avoid needle and seat pop off and flooding at idle.
The kit includes:
A pre-jetted TM40 Mikuni Carburetor fitted with a side pull knob choke.
Cast two into one manifold with an enlarged mid manifold plenum area to better facilitate the fuel mixture between the cylinders, which also eliminates the uneven plug burn issues experienced with some other manifolds. To allow for a wider manifold with better holding grip whilst still isolating the heat from the fuel delivery system, the OEM carb rubber mounting flanges are replaced with 2x shorter
Mikuni heavy duty flanges designed and made for the Harley market (fitment using 3 Bond grey is recommended). A 3rd heavy duty rubber flange is supplied for the manifold to Carb connection.
A throttle and push/pull cable combo as pictured (820mm Long) plus also a purpose designed USA made Pancake Filter.
Hardware includes all bolts and washers.
1x brass hose tail included, for using in conjunction with the port on the carb if you still have a vacuum petcock and the other for 1100 and some other models fitted with a vacuum ignition control box which must be connected.
If requiring to use one or both of the supplied tails, drill a pilot hole through the manifold at a location of your choosing, followed by a not full depth 5/32″ hole to then install the tail with some glue or Loctite.
No Air-filter support system is provided or should be needed, where if installing another heavier custom filter, the fabrication of a bracket or brackets will be required.
The jets to make this carb operate on Yamaha XV models have been fitted and there are spares for fine tuning the main jet circuit doing WOT tests. Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. For this reason, we have included what we have found to be a range of fuels.
You will instantly experience better throttle response, improved acceleration, increased horsepower and torque.
Includes
- Tm40 Jetted to your Virago
- Pull Choke Knob
- Cast Intake Manfiold
- Heavy Duty Rubber Mounting flanges
- Push Pull throttle cables and Throttle
- KN Pancake Filter
- Mounting bolts to intake
- HD Hose clamps
- Fuel line
- Fuel Filter