DIY: BRAKE FLUID CATCH BOTTLE Cafe Racer, scrambler, Bobber, Etc from astroscrambler
Tools Needed
- Clear plastic bottle
- Rubber tube longer than bottle (clear is better)
- Zip tie
- Drill
- Drill bit (equal or larger diameter than hose)
Step 1
Drill hole in bottle cap
Step 2
Zip tie the hose tube about ½ inch from the end and cut off excess. DO NOT ZIP TIE THE TUBE SHUT!
Step 3
Insert the hose from the bottom of the bottle cap.
Step 4
Attach cap to bottle and put clamp on end.
Step 5
Attach hose to brake bleeder nipple and use the clamp to hold in place. TA DA!
Step 6
Push tube down into bottle for easy storage.
Feb 14th 2023
Recent Posts
-
HSR42 Kit Installation Instructions 42-7 42-18 easy Kit
Easy Kit Installation Instructions for The HSR series carburetors are precise yet durable inst …Mar 22nd 2024 -
Yamaha XS500 Electronic igntion Instructions
Remove the ignition coverMake LF MarkRemove OEM RotorRemove OEM Rotor and Plate- points and Condense …Mar 1st 2024 -
BMW Mikuni Carburetor Kits Available For R50/60/75/90/90/100
We have Mikuni carb kits available for just about every BMW under the sun. Direct bolt on aftermarke …Feb 8th 2024