RS & TM Series Carburetor Throttle Cable Kit | Throttle cable and assembly | RS34, RS36, RS38, RS40

This Push Pull Quick Action throttle and cable assembly is for use on Mikuni RS carb kits and TM33-8012, TM36-68 and TM40-6 Pumper Carbs with 7’8″ handlebars. The total length of the outer cable measuring from the end of the lower thread to the elbow on the top fitting.

• This premium grade throttle cable, for use with Mikuni TM and RS Carburetors, has a Nylon lined outer housing. The Nylon liner inside the outer cable housing conduit is for reduced friction and heat resistance. The cables come with both mid and  lower cable adjusters.
• All throttle cables must be lubricated during installation with cable lube or a very light oil such as 3 in 1 to avoid clogging. Besides the need to lubricate the inner wire in the housing, the cable end barrels at their pivot points should be lubricated with water proof grease.
• If you need to clean your cable which is particularly relevant for dirt bikes. We recommend using WD40 or a very light oil such as 3 in 1. This effectively washes away dirt from the cable, without clogging it.

Any questions feel free to contact us