Intake Parts Categories

Rubber Intake Boots – Honda CB750K (1977–1978) Direct-fit rubber intake boots for 1977–1978 Honda CB750K models. Made from durable, fuel- and heat-resistant rubber to ensure a tight seal between the carburetors and cylinder head...

For Harley Davidson Shovelhead and XL 1000 Sportster models, a specially designed Mikuni 1/2" drop down manifold is available to improve tank clearance.  When using Mikuni HS40 carburetors, it is necessary to also purchase a KHS-004 rubber mounting...

Intake Manifold band clamp with O-ring. Sold as a Pair. Heavy Duty Chrome Clamp Fits the following twin Harleys. FITS: XL 1955-1977 FL 1955-1977 FX 1971-1977  Chrome intake manifold clamp set includes O-ring type seals and Allen screws...

     This mounting flange and rubber boot is designed for  carburetors with a 42mm through 45mm spigot outside diameter to any engine with mounting stud spacing ranging from 56mm center to center measurement through to 78mm...

Upgrade your Honda CB350, CL350, SL350, or 360 with these high-quality Mikuni intake manifolds. Designed for VM30, VM32, and VM34 carburetors, these straight-design manifolds offer a solid alternative to stock offset intakes. Fits Honda Models: CB350,...

Motorcycle Intake Manifold Spacer | 64mm to 78mm Bolt Center Line | KLR650 - Universal Fit 7mm wide spacer is designed for compatibility with Mikuni carburetors with an up to 42mm internal bore size. The slotted holes are to suit flange or carb mounting...

 Intake Manifold Spacer | 68mm Bolt Center Line | KLR650 - Universal Fit 10mm wide spacer has a 37mm x 40mm oval port matched bore for Kawasaki KLR 650. For use with Mikuni carburetors, up to 42mm internal bore size. The 6mm mounting holes are to...

 O-ring for sealing   This mounting flange and sleeve assembly is designed for fitting  carburetors with a 35mm spigot outside diameter to any engine with mounting stud spacings ranging from 46mm centre to centre measurement through...

Aluminum Intake Flange | 56mm to 78MM Stud Center | Motorcycle Manifold This mounting flange and rubber boot is designed for  carburetors with a 42mm through 45mm spigot outside diameter to any engine with mounting stud spacings ranging from 56mm...

Aluminum Intake Flange | 46mm to 59MM Stud Center | Motorcycle Manifold Includes a gasket and heavy duty rubber boot attachment sleeve which has a 35mm inside diameter.   Stainless steel hose clamps featuring rolled outer edges to protect the...

This mounting flange and sleeve assembly is designed for fitting Mikuni or any carburetor with a 40mm spigot outside diameter to your motorcycles or any other engine with mounting stud spacings ranging from Amal 2 inch (50.8mm) centre to centre...

Motorcycle Intake Manifold | 70mm center to center | 41MM Inside Manifold | VM30 VM32 VM34 Diameter Allows you to fit vm30 vm32 vm34 Mikunis to your bike. Sold as a pair 70mm Center where they mount. 41MM ID  Allows you to fit vm30 vm32 vm34...