Harley Davidson EFI to Carburetor Conversion 1984-1999 Evo Bigtwin HSR42 Mikuni Complete Carb Kit DynaTek 2000i

This Mikuni Carburetor kit is for converting to a high performance carburetor, Harley Davidson Twin Cam models using the earlier Magneti Marelli or throttle cable operated Delphi injection systems.

The following kit components are included:

Mikuni HSR Total Kit 42-8 SMC Custom Kit  for 1984-1999 Harley Davidson Big Twin Evo's.

Components Included:

• Mikuni HSR 42mm carburetor
• New performance manifold
• Rubber flange
• High flow K&N Filter
• Chrome cover
• Breather kit
• Mounting hardware
• Up-graded choke cable
• Stainless steel gas tank fittings
• Hi-Flow fuel petcock
• Gas tank adapter and plug sets
• Dyna 2000i Ignition module complete kit
• A new up-graded choke cable is provided and simply connect up your stock throttle cables. **Both the air-cleaner element and manifold will deliver an additional performance improvement over the Screaming Eagle equivalents.**

The gas tank adapter and plug sets differ between the early Magneti Marelli Tanks with an 18mm plug for blanking off the no longer required EFI return port and a 3/4″ x 16TPI thread on the petcock fitting. These are the ones pictured with the red washers (Loctite 567 Sealant required) and an inline fuel filter needs to be purchased separately along with your new fuel line of choice as the adapter inside diameter negates the space for a petcock screen. The same applies to the two Delphi options where the earlier tanks require a second 22mm plug and the later just the petcock adapter.

If you have any questions call us at (541-687-6400) or Contact Us