Mikuni

Harley Davidson EFI to Carburetor Conversion 1984-1999 Evo Bigtwin HSR42-8 Mikuni Complete Carb Kit DynaTek

(1 review) Write a Review
SKU:
smc-HSR42-8-efi
MPN:
smcHSR42-8efi
  • Harley Davidson EFI to Carburetor Conversion 1984-1999 Evo Bigtwin HSR42-8 Mikuni Complete Carb Kit
  • Harley Davidson EFI to Carburetor Conversion 1984-1999 Evo Bigtwin HSR42-8 Mikuni Complete Carb Kit
  • Harley Davidson EFI to Carburetor Conversion 1984-1999 Evo Bigtwin HSR42-8 Mikuni Complete Carb Kit
  • Harley Davidson EFI to Carburetor Conversion 1984-1999 Evo Bigtwin HSR42-8 Mikuni Complete Carb Kit
$1,250.95

Description

This Mikuni Carburetor kit is for converting to a high performance carburetor, Harley Davidson Twin Cam models using the earlier Magneti Marelli or throttle cable operated Delphi injection systems.

The following kit components are included:

Mikuni HSR Total Kit 42- for 1984-1999 Harley Davidson Big Twin Evo's.

For the maximum available increase in all round performance and power available, these kits are complete with everything needed for a total installation. Kits include a Mikuni HSR 42mm carburetor, new performance manifold, rubber flange, high flow K&N Filter, chrome cover, breather kit and mounting hardware. A new up-graded choke cable is provided and simply connect up your stock throttle cables. Both the air-cleaner element and manifold will deliver an additional performance improvement over the Screaming Eagle equivalents. 

Stainless steel Gas tank fittings and Hi-Flow Fuel Petcock. The gas tank adapter and plug sets differ between the early Magneti Marelli Tanks with an 18mm plug for blanking off the no longer required EFI return port and a 3/4″ x 16TPI thread on the petcock fitting. These are the ones pictured with the red washers (Loctite 567 Sealant required) and an inline fuel filter needs to be purchased separately along with your new fuel line of choice as the adapter inside diameter negates the space for a petcock screen. The same applies to the two Delphi options where the earlier tanks require a second 22mm plug and the later just the petcock adapter.

A Dyna 2000i Ignition module complete kit is also included.

  • If you have any questions Text us at (541-687-6400) or Contact Us
View AllClose

1 Review

  • 5

    AWESOME

    Posted by Jurgen Vanstone on Mar 25th 2024

    Fixed all the problems I had with the stock EFI Magneti system I had. Would recommend to anyone who has EFI on these early model harleys.

View AllClose