Blog

Warm up your hands this winter! With the Heated Grips 7/8ths handlebars | Motorcycle or Scooter Heated Hand Grips. A great affordable way to keep your hands warm and cozy this winter. These are some of the best heated grips we have found.They warm up fast and work fantastic.2 temp options with a flick of your thumb no excuses...go ride!Fits 7/8ths bars.Easy to wire and comes with all the parts your need.SPECIFICATIONS 12vLow setting: 10 watts / 50 degrees Celsiushigh setting: 15 watt …

Bought a new headlight for your bike and it has the wrong plug? Maybe your female H4 plug has a different pinout. Pictured below is the pinout for all of our H4 plug headlights. Load up a fsm or copy of your bikes wiring diagram and locate your headlight high beam, low beam, and ground wires. If different than the pictured below, snip your old female H4 plug off and splice in a new one as follows. Note the orientation of the plug, flat side down. Pinout as follows from left to right. High b …

In todays post we will be covering how to install any of the 7" or 5.75" lens guard covers we sell. The process is very straight forward. You will need a couple things for this install. First off, you will need your headlight and lens guard cover. As far as the tools needed it will either be a 3mm allen key or a phillips head screw driver for most lights. So now that have you have what is needed to perform this install. You will want to start by taking the front ring off of the headlig …

So you went out and bought yourself a new headlight, or maybe you are still waiting to pull the trigger. But look! Your old headlight is still on your bike. How do you replace it with this new fangled LED tech? No need to worry. We have a full install guide right here.Pictured above is our kz400 cafe bike with a Wire Meshy yellow headlight, We will be removing this and installing the DANG! kit today.The tools you need depending on your light are as follows, 5mm allen, 6mm allen, and a 12-14mm wr …