Mikuni
6mm Reducing Sleeve For Intake Manifold | 6mm button Reducer | | M6 Stainless Reducer
(No reviews yet)
Write a Review
- SKU:
- SMC-8809
- MPN:
- smc8809
Description
6mm Reducer sleeve for our stepped aluminum intake flanges.
SOLD EACH-
Sleeve only. Stainless steel Reducing Sleeve for better centralizing when using 6mm button head screws in 8mm slotted holes.
Related Products
Related Products
Aluminum Intake Flange | 46mm to 59MM Stud Center | Motorcycle Manifold
SpeedMotoCo
$49.95
Aluminum Intake Flange | 46mm to 59MM Stud Center | Motorcycle Manifold
Includes a gasket and heavy duty rubber boot attachment sleeve which has a 35mm inside diamet
Aluminum Intake Flange | 56mm to 78MM Stud Center | Motorcycle Manifold
SpeedMotoCo
$49.95
Aluminum Intake Flange | 56mm to 78MM Stud Center | Motorcycle Manifold
This
Air-box Adapter Mikuni Carbs- Reducing 58mm spigot to 46.5mm -14mm ext
Mikuni
$36.00
For Reducing the carb air-intake outside diameter down to 46.5mm and extending the total length of the carb by 14mm. This Mikuni Carburetor air-box adapter for is designed for use on our VM30,...
HSR42 Aluminum Intake Flange | 56mm to 78MM Stud Center | Motorcycle Manifold
SpeedMotoCo
$49.95
This mounting flange and rubber boot is designed for carburetors with a 42mm through 45mm spigot outside diameter to any engine with mounting stud spacing ranging from 56mm...
Air-box Adapter Mikuni Carbs- Reducing 58mm spigot to 50mm -18mm ext.
Mikuni
$36.00
For Reducing the carb air-intake outside diameter down to 50mm (2″) and extending the total length of the carb by 18mm. This Mikuni Carburetor air-box adapter for is designed for use on our...