Blog
Virago 750-1100 Carburetor Kits Now Available
Looking do ditch your old crusty carbs? Tired of the lackluster performance of your OE carbs. Look no further!Here at Speedmotoco we have plenty of options for your Virago. Whether it be a dual Mikuni setup or a single. From Manifolds to complete kits we have it all. This kit can be found here.Want to go with your own carburetor setup? No problem. With this two into one manifold, you can do just that!Manifold and intakes found here.Dual carburetor kits coming soon!
…
Sep 20th 2023
PRODUCT HIGHLIGHT Integrated tail/stop/turn signals
Delete your big clunky fender tail light, and upgrade your turn signals to LED all in one go. Get rid of your stock fender tail/stop light. You don't want it anyways! With these lynx turn signals (other styles available). Very simple 4 wire design with a driver unit to prevent burning out LEDs from too much current. They are are red when riding, flashing yellow when turning, and even brighter red when stopping. The other styles available are listed here. With even more on the way!https
…
Jul 25th 2023
How to mount headlight lens guard cover
In todays post we will be covering how to install any of the 7" or 5.75" lens guard covers we sell. The process is very straight forward. You will need a couple things for this install. First off, you will need your headlight and lens guard cover. As far as the tools needed it will either be a 3mm allen key or a phillips head screw driver for most lights. So now that have you have what is needed to perform this install. You will want to start by taking the front ring off of the headlig
…
May 30th 2023
Mikuni Aluminum Flanged Manifolds
Here at speedmotoco we are dedicated to providing the best products out there. Today we are showcasing a new product on the website. The Mikuni aluminum flange and rubber boot kit offers the least amount of offset from the engine possible. The 4mm base manifolds have a 62mm-75mm stud center. When mounted on your engine the front face of your carburetor will be positioned in a standoff location of 24mm back from the cylinder headmounting surface. The other aluminum manifold we offer offsets
…
Apr 20th 2023
How to Install the DANG! headlight
So you went out and bought yourself a new headlight, or maybe you are still waiting to pull the trigger. But look! Your old headlight is still on your bike. How do you replace it with this new fangled LED tech? No need to worry. We have a full install guide right here.Pictured above is our kz400 cafe bike with a Wire Meshy yellow headlight, We will be removing this and installing the DANG! kit today.The tools you need depending on your light are as follows, 5mm allen, 6mm allen, and a 12-14mm wr
…
Mar 27th 2023