Blog

Great Article by Dan!!http://www.dansmc.com/valveclearence.htmValves ? I have no problems... mine are nice and quite. Maybe and maybe not. As we know, metal expands and contracts as it heats and cools. Because of this there needs to be some clearance for the metal to expand into. Sometimes it's a little and sometimes it's a lot. So what happens if there is too little clearance ? Well, for one thing the valve loses most of it's heat through the valve seat. If the valve doesn't seat fully it wi …

Cb350 Retro racer build ~ cheap and easy. Part 1 We have a decent amount of parts laying around the shop and decided to throw some parts on the old cb350 we had laying around. We wanted to leave the bike with stock suspension and build using the basic tools a guy or gal would have access to and on a budget. First thing on the list was to ditch the rusted and pitted forks and throw on some forks now add some rear sets from https://speedmotoco.com/universal-rearsets-cafe-ra …

The world of Café Racer proposes numerous accessories that are more likely to modify the inside of a classic motorcycle than others. Here is a selection of Cafe Racer Headlights found at SpeedMotoCo. for you to customize your ride with. Cafe Racer Headlights can be purchased at speedmotoco Here is some options to check out.1. 7 inch headlight Wire Mesh Motorcycle | 7 inch Lens 7.75 inch overall LED Projectorhttps://speedmotoco.com/7-inch-headlight-wire-mesh-motorcycle-7-inch-lens- …